This design of adapter is embedded into you rifle stock and can be fitted almost flush (Flush is possible with alteration to the adapter).
It's worth noting that the installation any Gunsmith Adapter design would still require the retention of the existing sling swivel attachment.
This installation shows a fairly typical result, where only the rim of the adapter is above the surface of the stock.
If the stock design permits, the adapter can be seated event lower in the stock so that it is almost flush, as with the carbon fibre 'Raven Arms', fitted to a Blaser R8 Pro Success.
We have also seen these Gunsmith Adapters reworked during the installation process. In the example below the customer's own gunsmith had undertaken a complete re-profiling of the adapter to match the stock of his Blaser R93.
We have also had a number of specific enquiries from people undertaking custom rifle builds. As a result, we have produced a Classic Gunsmith Adapter machined from brass material, which gives a classic finish against a beautiful wood stock.